Conference presentation bells: what 1, 2 and 3 bells mean

Updated:

A presenter holding a microphone, speaking to a full auditorium
Photo: @miguel_photo (Unsplash)

At academic conferences in Japan, presenters are usually told the remaining time by the number of bell rings. The timings differ by conference, so check the program or the chair's guidelines first. The same method works well at any conference with short, back-to-back talks.

What 1, 2 and 3 bells mean

Many conferences use the bells like this.

  • 1 bell (one ring): a warning shortly before the talk should end. Time to wrap up
  • 2 bells (two rings): the talk time is over. Q&A starts
  • 3 bells (three rings): the whole slot, including Q&A, is over. Next presenter

Example timings

Work from the full slot (talk plus Q&A). How early the first bell rings varies by conference; 1 to 5 minutes before the end of the talk is common.

  • 10 min talk + 5 min Q&A (15 min slot): 1 bell at 8 min, 2 bells at 10 min, 3 bells at 15 min
  • 12 min talk + 3 min Q&A (15 min slot): 1 bell at 10 min, 2 bells at 12 min, 3 bells at 15 min
  • 20 min talk + 10 min Q&A (30 min slot): 1 bell at 15 min, 2 bells at 20 min, 3 bells at 30 min

Tips for the timekeeper

The bell is there to tell the presenter the time, not to stop them. If the talk continues past 2 bells, the chair prompts the presenter to wrap up.

If you ring a bell by hand, have one person ring and another watch the clock. Fewer bells get missed.

Ring the bells automatically with Kampe Timer

With Pro (from a $5 Event pass for 7 days), Kampe Timer can play chimes from the display device. Set the duration to the full slot (talk plus Q&A), then set the first and second ring times in the Sound settings.

For a 10 min talk + 5 min Q&A, set the duration to 15 minutes, ring once at 7 min left, ring twice at 5 min left, and ring 3 times at zero. That gives 1 bell at 8 min, 2 bells at 10 min and 3 bells at 15 min. Put each talk in the run sheet and “Next” switches to the next talk's timer.

Choose from four sounds: desk bell, chime, beep and soft tone. Previewing is free. Tap the display once after opening it (browsers don't allow sound until you tap).

Create a free timer

No sign-up. Works in any browser.

More guides

Use cases